Embedded Solutions – EIB Solutions

Automotive Measurement

Tyre Pressure and Tread Depth Measurement Device

Bluetooh enabled device which can transmit measured parameters directly to your phone and store into remote database.

Tread depth measurement in range from 0 to 25mm with 0.005 mm accuracy.

Tyre pressure measurement in range from 15 to 230 PSI with accuracy of 1 PSI. Battery life of 24 to 36 hours.

Ergonomic design for easy access to Tyre. External housing and complete turn key solution created for one of the major automotive Tyre manufacturer.

Industrial Online QC

This application has been designed and developed for Electrical / Electronics OEMs who are manufacturing mass production quantities.

Solution is designed for LED bulb and driver testing with proper data logging system. Board has 6 independent isolated measurement channels. Each is capable of measuring voltage, current, power factor, active power, reactive power and frequency. Device can be configured in different modes according to needs over USB interface. There is windows based software designed for data processing and logging. Range of measurement is 400VAC at maximum of 2A load. Accuracy is class 1. Range and accuracy class can be modified according to need of any particular application. Alternate type of Zigs and fixtures are also designed in accordance with needs of work pieces or specimens.

Same solution can be scaled and modified for multiple sectors of industries.

Protocol / Interface Conversion

Protocol: Design of a custom board which translates the serial data to Ethernet frames with intrinsic safety features for Oil & Gas industry. Major cost reduction in hardware. Form-factor also matches the retrofitting requirement.

Interface: Design of a daughter board which can replace an old RAM chip which is no more supported with much advanced ferromagnetic RAM chip. All interface control signals has been modified to comply proper communication between old hardware and new chip. FPGA and GATE based solutions are implemented.

Both solutions are highly cost effective as entire board redesign has been avoided.

Low Frequency Measurements

Analog Front: Differential input fully integrated analog front end for measurement of AC or DC signals with frequency ranging from 0 Hz to 30 MHz. Either differential or single ended measurement is possible. If use as differential then only one channel output is useful, else both. Four level of attenuation factors are available by use of signal switch relays. Board has it’s own transformer based power supply with proper filtering. Channel tuning is provided by means of presets and variable caps.

MessScope: 4 Channel differential measurement board is to designed for very low frequency measurement till 4 KHz. Required accuracy is within 2% of full range. Basic use of device is to give idea about the signal parameters such as RMS, PEAK and DC levels. Very low cost solution for rough measurement.

Textile

Jacquard: Complete high speed Jacquard scalable solution with 7200 hooks. Two display options available, one with char-LCD and other with complete 7″ color display. Very large memory to hold multiple designs. Highly modular design for serviceability and maintenance.

Rapier Electronic Let off Take Up: Complete electronic solution for rapier replacing the mechanical let off take up by digital configurable let off take up. Very cost effective solution for highly competitive field.

Captivate Touch Panel: Low cost multi button captivate touch interface eliminates the needs of mechanical tactile switches. This can directly be embedded into to PCBs, eliminating the need of additional hardware.

Industrial Metal Detector

This application has been designed and developed for OEMs who are manufacturing material transport systems with large quantity such as coal, cement, ores of different type etc.

Solution is specifically used for high cross sectional area search coils. FPGA based digital solution with high speed mixed signal processing. Display interface has 16×4 character LCD for easy configuration and viewing. Complete galvanic isolation for robust safety. Adjustable speed and sensitivity. Different type of configurable outputs. Remote operation option also available.

Same solution can be scaled for multiple sectors of industries.

Agriculture

Hourmeter: Time totalizer with 1 minute resolution and up to 9999 hours. Robust design to sustain heavy voltage surges. Specifically designed for agriculture industry. Very low cost solution for mass production and easy to repair.

Cyclic Timer Counter: General purpose cyclic timer counter with 999.9 digit resolution in seconds, minutes and hours. Two different modes of operation as counter and timer. Additional mode as RPM meter can also be configured. Highly configurable device with single relay output.

VA Meter: General purpose 3 phase AC voltage and current measurement board with additional interface for GSM / GPRS connectivity. Relay output for healthy supply with on delay. Fault monitoring such as low, high voltage, over current, single phasing, reverse phasing and under current.